Technology in 143 Campbell

143 Campbell

143 Campbell contains the following equipment:

  • Built-in projection unit
  • Computer with CD/DVD-ROM, Zip drive, and floppy drive (plus USB hub for easy flash drive access)
  • ELMO visual display
  • VCR

Steps for use:

Turn on the projection unit.

Select which device you will be using on the control panel.

Turn on any of the other equipment you will be using.

projection unit and control panel ELMO power switch VCR and computer power switches

Computer

Log in with your EHE username and password.

VCR and ELMO special instructions

These two pieces of equipment (VCR and ELMO) are both on the same button on the control panel. You will have to also select which one you want to use from the switch located beside the VCR.

Press the button labeled VCR if you want to use the VCR.

Press key for VCR

Press the button labeled ELMO if you want to use the ELMO.

Press key for ELMO

Audio level

Audio kept at 5 or lower

You shouldn't have to adjust the audio level, but if you don't hear sound from a video, check the knob to be sure it is at 5 or lower.

PLEASE turn off the projection unit when your class ends. Replacement bulbs are expensive.

Also, don't forget to log off when you are finished using the computer.

If you have any further questions, please contact the Service Desk.